Earthquake Tie Down Fastener Kit For Metal Studs. Secures furniture to metal studs inside of walls Our patented Secure-Quick steel cable assemblies are the latest in earthquake, disaster and child safety. Secure Quick's unique design allow for ease of use and quick installation. Secure Quick's harnesses are easily disengaged for relocation or servicing of secured items. Secure Quick Metal Stud Harnesses Kit To Secure Furniture The best child safety and disaster restraint made for home use. The Ultimate Child Safety and Disaster Preparedness Product Metal Stud Kit Metal Stud Kit Contents Keep furniture from falling in disasters or if climbed on by children. Holds up to 500 lbs. Adjustable for when you want to move furniture. 2 cable assemblies per package. Secures 1 item up to 72" wide or 2 small items less than 16" wide. Secure Quick Is Always The Professionals Choice.... Don't Be Fooled By Plastic and Cloth Placebo Fasteners. Use For: Homes Day Care Centers Buildings with Wood Studs Hospitals Retirement Homes Office Buildings The photographs below are examples of the various ways the Secure Quick harnesses can be used. When using the Secure Quick system keep the cables concealed from view by mounting in locations which will allow maximum strength. Cables should always be placed onto the main interior structure of the item being secured. Always attach wall brackets directly to studs located inside of walls. For best results in locating studs (either wood or metal) see the WALL WIZARD STUD FINDER. Child Safety Should Always Be A Number One Priority..... Secure Quick Metal Stud Harnesses Kit Install Images  Installation Instructions: 1) Locate a metal stud in the wall directly behind the furniture’s location.* When deciding on a location, take into account the strength of the furniture’s frame in that area. Mark the location of the metal stud about 4" below the top of the furniture. Drill one 3/8" hole into the wall and through center of stud. *Use a stud finder to locate center of stud. Be certain to drill hole as close to the center of the stud as possible. Studs are commonly 16" apart. Insert stud anchor into stud and then place screw through cable eyelet. Insert screw into toggle to engage toggle clamp before turning screw. When stud anchor engages tighten screw. (figure 1) 2) On the rear of the furniture, locate a strong portion of the furniture’s frame where a 1/8” hole can be drilled. Ideally, this should be near the top of the furniture, directly in line with the cable that is now fastened on the wall. Pass the end of the cable through the furniture frame, (figure 2) and pull cable to take up any slack, so the furniture is snug against the wall. There should be less than 2” - 3" of slack between the wall and the furniture piece (figure 4). Fasten the end of the cable through the cable fastener, as in (figure 3). Tighten the screw on the cable fastener with the included hex wrench. Keep the hex wrench in a safe place, as it will be needed to remove the fastener before the furniture can be moved. It is recommended for furniture items over 48" wide that both cable braces and cable fasteners be used. *We use and recommend the Wall Wizard for locating studs. Purchase at wallwizard.com